Here you are going to learn about how you can deal with a minor problem in your car. You need to read the steps thoroughly.

Wheels are the important component of a vehicle and that is the reason you need to look for a professional help who will take care of the issues that are bothering you’re travelling experiences. This is the reason you need to look for a car repairing service that is inclusive. But if you have a car and you know how to drive it you must have an idea to take care of the wheel. You need to have the knowledge regarding how you can change the leather band around the wheel so that you can keep the car going.

Steps to follow

According to Flat tyre changing in Melbournethere is a process of changing wheel band and that you need to follow. These steps are given by following the traffic rule so you must maintain these.

Finding a safe location

If you have faced an issue related to the wheel, then you need to find a safe location to change it. According to Flat Tyre changing in Melbourne, one has to find a place that will not hinder the usual traffic. If you are on a straight stretch of road, then finding the place is little bit easier. If your car faced problem on a curved road, then you need to find a straight stretch to repair the wheel.

Turning on hazard light

You need to turn on the hazard light while you are changing the leather band of the wheel. The light will let the other drivers know that you are changing the wheel band. This also comes under a traffic rule as well.

Applying the parking brake

When you have parked your car, you need to use your parking brake and it is necessary because the band around the wheel is flattened. It will help you to avoid any possible hazardous.

Using the wheel wedge

There are wedges in every wheel and that is the reason you need to use it for changing the belt around the wheel. You can also use brick or stone for stopping the vehicle from slip away.

Remove the wheel cover

While you are working on the wheel you need to remove the wheel cover and hub cup so that you can do your task properly.

Loose the lug nuts

For this you need lug wrench so that you can loosen up the nuts in the wheel. You need to learn how to remove them so that you can proceed with other works. After that you need to place the jack under the wheel and then you need to mount the portion of the car in order to remove the band around the wheel.

So, these are the steps that you need to follow. Once you are done with changing the belt around the wheel you need to tighten the nuts so that the wheel functions properly. You need to learn how you can do it on your own because it will be convenient.

If you are in North Melbourne, Victoria 3051, and looking for an emergency tow truck service or roadside assistance Melbourne service, this is the best way to visit us.

Northern Tow Trucks

620 Canning St

Carlton North VIC 3054

(03) 7064 2500

www.northerntowtrucks.com.au